The power efficient light bulbs have been utilized and offered for several many years. It just that in early days they are not so well-known due to the fact they were huge in size, took considerable time to reach full brightness, …
Tag Archive: fact
By Hans Dekker
There are many good reasons to conserve energy. If we use less gas, oil and electricity we will save money, and the pollution associated with extracting and using fossil fuels will decrease. Reducing greenhouse gas production may help to reverse global warming. In a nutshell – conservation of energy has both personal and societal benefits.
Most people are concerned with making their money last longer and energy conservation can help by reducing our energy costs. Homeowners can do many things to cut down on their energy needs. Perhaps the best thing they can do to is to install better insulation to retain warm and cool air.
Heating and air conditioning are the biggest energy consumers of the average household. Much of the heat and cool air escapes because of poorly insulated roofs, walls, doors, and windows. In fact in a lot of cases heating and cooling is responsible for around 50% of your energy costs. Improving insulation will result in greater conservation of energy and lesser energy costs. Small changes in this area can result in dramatic reduction in your monthly payment to your utility company.
Old cooling and heating appliances should be replaced with newer models which are more energy efficient. Other large appliances like refrigerators can also be replaced with newer models that are designed to conserve energy. Always make sure you read the energy label, if you do, you will often find that a cheap product in fact can be expensive in its every day use because of its energy consumption.
Traditional light bulbs are inefficient because much of the energy they consume is converted to heat. Replacing all your incandescent bulbs with compact florescent bulbs will provide the same level at light with less energy consumption. Even though the cost of these bulbs is greater than traditional bulbs, they last up to 20 times longer, resulting in significant overall savings.
Using alternative energy sources such as solar panels or wind turbines can greatly reduce the amount of energy needed from traditional sources. The electricity produced by these devices can be fed back into the local power grid if it is not immediately used by the household. This reduces the power bill even further (the power meter runs backwards) while supplying clean power to your community.
Conservation of energy is not just for homes, cars and trucks are available with more energy efficient engines and some can run on alternate power sources such as hydrogen or electricity.
Conservation of energy is something that everyone can contribute to. By being careful in how we use our resources we are building a society for our children and grandchildren.
About the Author: Hans is author of
The phasing out of incandescent light bulbs in the EU is due to end in 2011 and many people are worried about giving up their beloved bulbs. However, in this article I will detail some of the common myths that are associated with energy saving light bulbs and tell you the facts so you can make an informed decision.
Myth: Energy saving bulbs do not produce the same light output as traditional bulbs.
Fact: Today energy savers can easily replicate the light output of traditional bulbs using around a fifth of the power. LED bulbs are also becoming more powerful and the new generation are able to produce the same amount of lumens as halogen bulbs.
Myth: Energy saving bulbs are ugly and don’t look good in some of my fittings.
Fact: Energy savers are now available in all traditional bulb styles including classic, candle and spotlights, meaning they will fit in some of your most ornate fittings.
Myth: Energy saving bulbs are not environmentally friendly as they use mercury which is a hazardous material.
Fact: New energy savers use a mercury substitute called amalgam, this is completely safe to handle, transport and store and it is of no risk to either humans or the environment. There is also a recycling charge included in the price of the bulb making them far more environmentally friendly than traditional bulbs.
Myth: Energy saving bulbs trigger epileptic fits.
Fact: A small number of cases have been reported with the older models, however these were never verified. The new models run at a higher frequency and do not have any know health impact.
Myth: Energy saving bulbs don’t light up straight away.
Fact: The new models of energy saving bulbs have an almost instant switch on time and will reach their full brightness straight away. The delay in earlier models was caused by ignition of the gas inside the bulb.
Myth: Energy saving bulbs do not produce the right coloured light.
Fact: Advancements in technology mean that lighting manufacturers can now replicate the light colour of traditional incandescent bulbs. A recent study showed that only 50% of people can tell the difference between energy savers and incandescent bulbs (Pepsi Challenge, EST, 2008).
Myth: Energy saving bulbs will not fit some of my light fittings.
Fact: Today energy savers are available in all four traditional caps (bayonet, edison screw, small bayonet and small edison screw) as well as GU10, MR16 and PAR fittings.
Myth: Energy saving bulbs will not work with dimmer switches.
Fact: New models of energy saving bulbs are available with dimming capabilities
When energy saving light bulbs were first available many believed that they were no substitute for incandescent lighting however technological advancements have ensured that they can match incandescent bulbs in looks and capabilities while being five times more efficient. I hope this article has helped to dispel some myths about energy saving lighting and you can make an informed decision about your lighting needs.
You can visit the following sites for more info
Crystal Glassware and Chandeliers are just Great and represent Crystal That Reflects and Reveals a Truly Well-dressed Table
By Allen Franklin
Choosing crystal glassware and chandeliers
Glass particulars applied in tableware settings are usually grouped as crystal glassware and are applied to identify the drinking vessels of a table setting. Additionally, the nomenclature is used to name objects fabricated from glass. In the catering industry, glassware commonly refers to any drinking vessel, even if it is made from plastic materials such as polycarbonate or polystyrene.
Most retail merchants nowadays extend four typecasts of crystal glassware in their product line-ups, specifically:
Barware beer mugs and pitchers
Crystal high-class processes of crystal glassware such as carafes and flutes
Usual crystal glassware the more general varieties of glasses employed for beer, iced tea, juice, or water
Stemware champagne and wine glasses
Whether a person opts to fuse contrasting characters of crystal glassware or purchase paired lots is purely a affair of personal penchant. Either path, there is no powerful and express rule about merging or not merging glassware in your accumulation. Reckoning on the types of drinks and foods you are planning to attend to, there is crystal glassware obtainable for all occasion. Being mindful of the all case of crystal glassware that you want is supreme when selecting the type of glassware you want for your table.
glassware Market Styles
Barely similar any other consumer industry, there are tried market Vogues to be alert of in the crystal glassware industry as well. Currently, the succeeding 4 Trends are apparent:
Cocktail glasses, whether they are the authoritative edition or vintage cocktail shakers, are advancing in popularity again. These are expended to make ambiance and supply a sense of glamour that stimulates savoring a drink more alike a joyous outcome or function.
Cut crystal manufactured in the 1930s carries on to be an brilliant purchase for gatherers. It is not unusual to notice sets in styles synonymous to the modern day collections. Due to the fact that it is more often second-hand quality rather than prehistoric, you wont have the overly raised cost tag that is attached to antique glassware.
fusing more spruce flairs the older typecasts is an more and more frequent course. For example, the industry has seen an growth in the buying of champagne bowls, both the more modern ones and those constructed in the 1950s. People would commonly exclusively buy champagne flutes in the past.
Bigger red wine glasses that were prevalent everywhere several years back are no longer as favourite as they once were. Individuals are commencing to envision that they can end a bottle of high-priced champagne or wine by filling a couple of these. Additionally, the add up of alcohol an individual can deplete without being affected also numbers into considerateness. Small glasses are hitting in popularity once again.
standard eccentrics of glassware
Although there are various schools of idea about the divergent categories of glassware, the succeeding is a list of the 7 most familiar families in the industry today:
At Last, be mindful of the fact that not all glassware is dishwasher secure and should solely be hand washed in order to manage for it the right way.